Ich muss noch genau 4 Wochen arbeiten. Dann ist Ende. Danach können wir dann neu planen.
Top und Glückwunsch.
Ich muss noch genau 4 Wochen arbeiten. Dann ist Ende. Danach können wir dann neu planen.
Top und Glückwunsch.
Unser Sohn hat sich einen 3 Achser 12 m Vario zugelegt mit einer Mini Garage.
Damit auch sein Lieblingsauto reingeht mussten wir heute ein wenig in der Garage rumschnippeln um mehr Platz nach vorne zu haben, damit hinten die Klappe zugeht.
Und wir haben es hinbekommen der MG geht rein, ist zwar knapp, aber es geht.
LG Michael
Klasse! Sieht super aus!
Unser Sohn hat sich einen 3 Achser 12 m Vario zugelegt mit einer Mini Garage.
Der weiße aus Slowenien?
Gratulation, sehr schönes Fahrzeug.
Grüße Thomas
gehst aber dann schon noch zum aushelfen hin
Im Leben nicht.
Die kommen auch ohne mich klar.
Top und Glückwunsch.
Danke
Nachdem ich lange überlegt habe, was ich mit meinem hellgrauen Teppichboden wohl mache, habe ich mir diesen Winter einen kleinen Waschsauger gekauft.
Den habe ich heute Vormittag ausgiebigst gequält... und den Teppich auch. Und mich auch...
Das Ergebnis ist einfach hervorragend, da trau ich mich noch nicht mal, vorher/nachher Photos einzustellen, dermassen gross ist der Unterschied. Achja, hellgrau ist der Teppich
Man bekommt das gar nicht so sehr mit, wie sehr das ewige barfuss rein und wieder raus und wieder rein im Sommer das Fahrzeug und insbesondere den Boden verschmutzt. Im Winter zieht man ja die Schuhe aus, aber im Sommer, wenn nur barfuss gelaufen wird...
Zuerst war ich skeptisch gegenüber diesen Mini-Teilen, denn die industriellen Waschsauger für grosse Flächen sind ja richtige Trumms. Aber dieses kleine Ding tut exakt was es soll und kommt keineswegs aus dem Baukasten der Puppenstube Dabei ist es trotzdem klein genug, seine Ecke auf Dauer im Mobil zu finden.
Ich bin zufrieden und kann sowas nur empfehlen.
Hier ist das Teil:
Gestern ( Sonntag ), habe ich mich über etwas hergemacht, was ich schon seit 1 Jahr vor mir herschiebe, die Zusatzdämmung mit Armaflex im Motorraum und den Radläufen.
Das war eine fummelige Angelegenheit, vor allem die Radhausverkleidungen herauszubekommen, hier merkt man dass das originale Fahrerhaus klappbar ist und sich keiner bei dem Aufbau Gedanken darüber gemacht hat, das diese evtl. mal raus müssen.
Arbeitszeit ca. 5 Stunden mit viel Gefluche über die Konstrukteure bei Morelo .
Die Arbeit hat sich nach der ersten kurzen Fahrt mehr als gelohnt, "Knarz"- und Motorgeräusche sind nochmal deutlich gemindert und auch Abrollgeräusche gefühlt deutlich weniger.
Alte 24" fernseher in wohnzimmer heraus (jaja, mehr platz gibst es nicht in unseren Phoenix) und 25" computer monitor + chromecast herein. Bessere auflosung, weniger strommbedarf und zusammen mit Starlink ein perfekte losung fuer uns.
Ich habe heute mal meine Notöffnung der Eingangstüre versteckt
Hallo Frank,
ich habe am Samstag den linken Einstiegsgriff abgeschraubt und mit neuem selbstklebendem Leder bezogen,
er sah nach vier Jahren einfach nicht mehr schön aus, jetzt wie neu.
Meinst Du sowas ?
Uwe
Hallo Uwe, wir haben jetzt unseren "neuen" aber eben aus 2019 gebrauchten NiBi Flair 920 LS auf dem Hof stehen, juhu. Andrea findet den Griff links ( abgegrabbelt) voll doof. Wie hast du den abgeschraubt ? und wo hast du das selbsklebende Leder her ? Ich bin total gespannt wie du das gemacht hast . Besten Gruß Gunther
Habe endlich die LED-Lampen eingebaut. Nun muss es nur mal dunkel werden....
Beste Grüße
Remco
Hm…. Gibts da ne Freigabe für den MAN? Optisch haben wir ja mit dem R07 die gleiche Front
Hallo Gunther,
das selbstklebende Leder hat meine Frau Andrea bei Amazon bestellt, wir geben euch gerne etwas davon ab
wenn du mal im Süden bist.......
Den Griff abzuschrauben ist nicht schwierig:
zuerst die Klappe ganz unten öffen, dann das Brett das dir nach oben den Weg versprerrt einfach kräftig nach unten heraus
ziehen, (da ist ein Loch drin zum reingreifen) ist nur gesteckt, dann ist der Weg zu den beiden Schrauben am Griff von hinten frei.
Das sind zwei Schrauben mit SW 13 am besten gehts mit einer kleinen Rätsch 1/4 Zoll.
Grüße Uwe
Hm…. Gibts da ne Freigabe für den MAN? Optisch haben wir ja mit dem R07 die gleiche Front
Wenn Du die LED meinst? Ja, es gibt eine Freigabe für das Abblendlicht für die Osram-LED.
Beste Grüße
Remco
Ja, es gibt eine Freigabe für das Abblendlicht für die Osram-LED.
Das würd mich interessieren. Dann könnte ich vielleicht endlich die "Grabfunzeln" tauschen
Da ich mir nichts an die Scheibe kleben will und der Winkel des Displays sowieso ungünstig wäre, habe ich die Mautbox an eine transparente Acryl Buchstütze mit starkem Klett befestigt und diese mit Klett am Armaturenbrett befestigt. Hält einwandfrei.
Hallo, nicht geschraubt aber große Wäsche dann polieren und Nanoversiegelung jetzt habe ich wieder mindestens 4 Jahre leichtes Waschen😎